Fagor IO-HOB-1196 Instruction Manual page 55

OPERATION
Switching off cooking zones
● A given cooking zone must be active. The decimal point is on.
● Slide your finger across the heat selection sensor field (2) to reduce the heat setting to „0".
The cooking zone will be deactivated after approximately 10 seconds. If
the cooking zone is still hot, its display (3) will alternate between showing
the letter „H" and „0" for approximately 10 seconds and then the letter „H"
will be shown.
Switching off the appliance
● The cooking surface operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If the cooking zone is still hot, the relevant display (3) will show the letter
„H" to indicate residual heat.
55