Fagor IO-HOB-1196 Instruction Manual page 49

OPERATION
The child lock function
The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
Setting the child lock function
The child lock function can only be set when the appliance is switched on and none of the
cooking zones or timer is in operation (all displays show „0" and dots are flashing). To set the
child lock function switch the appliance on using the on/off sensor field (1), simultaneously
touch the front right cooking zone selection sensor field (3) and booster function sensor field
(6) and once again touch the front right cooking zone selection sensor field (3). All displays
will show the letter „L" (Locked), which indicates that the Child Lock function has been set. If
cooking zones are still hot, the display will alternate between showing the letters „L" and „H".
The Child Lock function must be set within 10 seconds and no sensor fields
other than those described above must be touched. Otherwise the Child Lock
function will not be set.
The Child Lock function remains set until it is released even after the appliance
has been switched off and then switched on again. Disconnecting the appliance
from electrical mains does not release the child lock.
Releasing the child lock function to cook only
Switch the appliance on using the on/off sensor field (1); all displays will show the letter „L" (Locked).
To release the Child Lock function simultaneously touch the front right cooking zone selection
sensor field (3) and booster function sensor field (6). The letters „L" shown on the cooking zone
displays will be replaced with „0." and a flashing dot. Cooking zones can now be operated. (For
details please see section „Selecting the cooking zone heat setting").
Releasing the child lock function
Switch the appliance on using the on/off sensor field (1); all displays will show the letter „L" (Locked).
To release the Child Lock function simultaneously touch the front right cooking zone selection
sensor field (3) and sensor field (6) and once again touch the sensor field (6). The appliance will
switch itself off (all displays are out).
The Child Lock function must be released within 10 seconds and no sensors fields
other than those described above must be touched. Otherwise the Child Lock func-
tion will not be released. If the Child Lock function has been released successfully,
„0" and a flashing dot will be shown on all displays once the appliance is switched
on using the on/off sensor field (1). If cooking zones are still hot, the display will
alternate between showing „0" and the letter „H".
49