Fagor IO-HOB-1196 Instruction Manual page 53

Table of Contents

Advertisement

Available languages

Available languages

OPERATION
Stopping Timer
When the set time has elapsed an acoustic signal is sounded, which can be muted by
touching any sensor field. If no sensor field is touched, the acoustic signal will stop auto-
matically after 2 minutes.
To stop the timer countdown before the set time has elapsed:
● select a cooking zone by touching cooking zone selection sensor field (3).
● then, during the next 10 seconds, touch the Timer selection sensor field (4). „0 -" will be
shown on the Timer display (4) and the appropriate Timer activation pilot light (5) will light
up to indicate activation of the Timer function for the relevant cooking zone.
● If no setting is selected within 10 seconds or the cooking zone selection sensor field (3) is
touched, the timer will stop and the Timer display (4) will go out.
Kitchen Timer
When no cooking zones are in use, the Timer function can be used as a regular Kitchen Timer.
Setting Kitchen Timer
When the appliance is off:
● Switch on the appliance by touching the on/off sensor (1). „0" will be shown on cooking
zone displays (3) and the LED pilot light will light up above the on/off sensor (1).
● then, during the next 10 seconds, touch the Timer selection sensor field (4). „0 -" will be
shown on the Timer display (4).
● Now, select the desired Timer setting by sliding your finger across the setting selection
sensor field (2). The second digit is set first and the first digit is set next. Once the second
digit is set, it will be shown on the display and the timer will automatically allow you to set
the first digit by showing the dash „-" symbol (for example „- 6"). If no setting for the first digit
is chosen within 10 seconds, the dash „-" symbol will be replaced with „0" (for example „0
6"). The countdown starts when „0" goes out on cooking zone displays (3).
Stopping Kitchen Timer
When the set time has elapsed an acoustic signal is sounded, which can be muted by touching
any sensor field. If no sensor field is touched, the acoustic signal will stop automatically after 2
minutes.To stop the Kitchen Timer ahead of time touch the on/off sensor (1) twice. All displays
will go out.
53

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

8508549

Table of Contents