Setting The Cut Length Settings For All - Canon CP300 User Manual

Setting the Cut Length Settings for All Pages.
You can set the Cut Length settings (Cut Length and Alignment) for all pages at
once.
1
Press the [Length/Margin] key.
2
Use [ ] or [
▲
The cut length setting screen will appear.
3
Use [ ] or [
▲
press the [Enter] key.
The value can be set by entering numbers
or using arrow keys ([
Press the [Enter] key, and the alignment
setting screen will appear.
4
Use [ ] or [
▲
[Enter] key.
When you select "Left" or "Right, " set the
(P.58)
margins.
Press the [Enter] key to return to the
character input display after the data has
been checked and changed.
NOTE
• If there is data that exceeds the cut length due to changes in the batch settings, a
confi rmation message will appear to delete the data that exceeds the cut length. To
cancel the operation, select "No. "
• If you are unable to input text due to batch setting, set the cut length of the page to
"Automatic" or change the character size.
] to select " Batch Setting, " and press the [Enter] key.
▼
] to select "Specify, " enter the cut length, and then
▼
] / [
◀ ▶
] to select the desired setting, and then press the
▼
]).
59
Cut Length
Cut Length
Alignment
Batch Setting
Cut Length
Automatic
Specify 10.0㎜
[ 4.0 to 150.0㎜ ]
Alignment
Centered
Left : 2㎜ [2 to 5]
Right : 2㎜ [2 to 5]