Setting The Cut Length; About Cut Length - Canon CP300 User Manual

Setting the Cut Length

About Cut Length

The length of one tube (or one label) is called the " Cut Length. " The default setting is
"Automatic. "
A1 Pump Room
Cut length
Setting
Automatically sets and prints
the optimal cut length based
on the number of characters
Automatic entered, the size of the
(Default characters, and the spacing
Setting) between the characters. The
alignment is centered, and the
margins are 2 mm on the left
and 2 mm on the right.
Prints with the specifi ed cut
length. When "Specify" is
Specify selected for "Cut Length, " you
can specify the alignment (and
margin).
Details
55
Print Image
A1 Pump Room
e.g.) "Left" alignment
A1 Pump Room