Surround Text with a Frame
This allows you to surround text with a frame. The default setting is "None. "
Pump Room
[Example] Enclosing text in a frame.
1
Display the page where you want to change the frame settings.
2
Press the [Format] key.
3
Use [
] or [
▲
4
Use [
] or [
▲
The display returns to the character input
display.
The frame shapes setting can be checked
on the display.
NOTE
• The frame can be set for each page.
• When the cut length is specifi ed, the frame may not be set.
• Depending on the settings of the number of lines, character size, cut length, etc. and the
size of the print media, the frame may not be printed correctly.
• No error message will be displayed even if the print data extends beyond the width (top
and bottom) of the print media. Refer to
information on character size and frame settings.
] to select "Frame" and press the [Enter] key.
▼
] to select "On, " and then press the [Enter] key.
▼
"Maximum Printable Character Size (P.44)"
45
Format setting
Orientation
Frame
Frame
Off
On
for