Canon CP300 User Manual page 14

7
Cut Length/
Alignment/Margin
8
Cursor
9
Cont Print
10
Character Space
11
Lines
12
Character Size
13
Frame
14
Orientation
15
Page
NOTE
• This product treats the string of characters to be printed on one tube (or one label) as
one page. Press the [Enter] key to create a new page. (Page Break)
For more information on page manipulation and editing, refer to
Pages (P.60)"
.
Displays the settings for the length (cut length) of a tube (or
a label), alignment, and margin of the current page.
• When using the "Automatic" cut length feature
(The set value is highlighted.)
Cut Length (mm) Alignment (Centered "C" )
• When using the "Specify" cut length feature
Cut Length (mm) Alignment (Centered "C", Left-aligned "L" ,
Text is entered at the position indicated by a
Displays the number of times the current page will be
printed repeatedly.
Displays the character space setting for the current page.
(P.48)
Displays the number of lines setting for the current page.
(P.49)
Displays the character size setting for the current page.
(P.43)
Displays the frame setting for the current page.
Displays the print orientation and character orientation
settings for the current page.
Displays the page number of the current page.
: Displayed when there is a page before the current page.
: Displayed when there is a page after the current page.
10
Right-aligned "R" )
Margin (mm)
(P.79)
(P.46)
"Creating and Editing
(P.55)
(P.38)
.
(P.45)
(P.37)