4
Remaining Ink
Ribbon
5
Power
6
Warmer
Indicates the remaining capacity of the ink ribbon with
a mark.
: The display changes every 10%.
(Ribbon remaining)
When the remaining capacity is low,
prepare a new ribbon cassette.
⁝
(Out of ribbon)
(Not displayed) : The ribbon cassette is not loaded, or
the information cannot be read.
The power source being used is indicated by the
following symbols.
: The AC adapter is being used.
: When the battery is being used,
(Power remaining)
⁝
(Out of power)
Displays the settings for the (optional) tube warmer.
(P.31)
Auto
: Only warms the tube during printing.
When printing is executed, the tube will
be warmed up to the set temperature,
and then printing will start.
RDY
: Warms the tube except while
printing. When printing is executed,
it starts printing immediately. "WAI"
will be displayed when the set
temperature is adjusted.
OFF
: Disables the tube warmer settings.
(No indication) : The tube warmer is not set.
9
(P.12)
the remaining battery charge is
indicated by this symbol.
(If the battery is not suffi ciently
charged, the remaining capacity
may not be displayed correctly.)