Canon CP300 User Manual page 97

5
Use [ ] or [
▲
6
Use [ ] or [
▲
press the [Enter] key.
The Half Cut Depth can be set in 11 levels:
"Deep (1-5), " "Normal, " and "Shallow (1-5).
Each time you press [
deepened by one step.
Each time you press [
become shallower by one step.
7
Press the [Shift]+[Cancel] keys.
The display returns to the character input
display.
IMPORTANT
• If you make the cut depth deeper than necessary, the cutter and blade receiver will wear
out quickly.
NOTE
• If the half cut is too deep even when the cut depth is adjusted to the shallowest setting,
the blade receiver may be worn out. Replace the cutter and blade receiver.
] to select "Label, " and press the [Enter] key.
▼
] to select the half cut depth adjustment value, and
▼
], the cut is
▲
], the cut will
▼
Label size
H al f C u t D ep th
93
6
Normal
9 Normal
12 Normal
[ Deep 1 ]
(P.158)