Adjusting the Cut Motion
If it does not cut well when you change the print media, adjust the Motion of the
cut. Adjustment can be set for both "Half cut" and "Full cut. "
NOTE
• If the cutter blade is becoming less sharp, adjust the depth of the cut.
Changing the Motion of the Half Cut
■
The motion of the half cut can be set for each type and size print media. The default
setting is set to "Normal. "
[Example] The half cut of the label tape (12 mm) is not cut properly, so make the
cut one step intenser.
1
Press the [Option] key.
2
Use [
] or [
▲
3
Use [
] or [
▲
key.
4
Use [
] or [
▲
] to select "Print adjust" and press the [Enter] key.
▼
] to select " Half Cut Motion" and then press the [Enter]
▼
] to select "Label, " and press the [Enter] key.
▼
O p t io n
Adjustments
H al f C u t M o t io n
97
(P.92)
Fi l e
Pr i n t a d j u s t
S e t t i n g
Hal f C u t De p t h
Hal f C u t Mo t io n
F u l l C u t D e p t h
Shrink tube
Label
Clear tube