Specify The Cut Length And Alignment - Canon CP300 User Manual

Specify the Cut Length and Alignment

This is how the cut length and alignment are set. If you set the cut length to
"Specify, " you can change the alignment. The default setting for alignment is set to
"Centered. "
Setting
Centered
(Default Centers the text.
Setting)
Aligns text to the left end (in
the direction of the start of the
Left
text). Margins can be set in the
range of 2 to 5 mm.
Aligns text to the right end
(toward the end of the text).
Right
Margins can be set in the
range of 2 to 5 mm.
NOTE
• When "Centered" is selected and the maximum number of characters for the cut length
is used, the minimum margin is 0.7 mm in total for both sides.
Details
56
Print Image
Margin Margin
Pump Room
Cut Length
Margin (2 - 5 mm)
Pump Room
Cut Length
Margin (2 - 5 mm)
Pump Room
Cut Length