Non-Precision Approach Operations - Garmin GNS 530 Pilot's Manual And Reference

activate the final course segment of the approach. This
option assumes the pilot will receive vectors to the final
Activating the approach, with vectors to
final:
1) Press the PROC Key to display the Procedures
Page.
Turn the large right knob to highlight 'Activate
2)
Vector-To-Final?' (Figure 6-6) and press the
ENT Key.
Figure 6-6 Procedures Page
3) A confirmation window will appear with 'Yes?'
highlighted, press the ENT Key.
approach while still some distance away, enroute to the
destination airport. Later, if vectored to final, use the
190-00181-00 Rev. G
6.2 NON-PRECISION APPROACH
The GNS 530 provides non-precision approach
can also be used as a supplemental aid for precision
must be used for primary approach course guidance.
provides guidance through each leg of the approach,
automatically sequencing through each of these legs, up
to the
may be flown with a vectors-to-final transition.
GNS 530(A) Pilot's Guide and Reference
OPERATIONS
NOTE: The following approach examples are
intended for instructional use only and are not
to be used for navigation.
SECTION 6
PROCEDURES
6-3