Garmin GNS 530 Pilot's Manual And Reference page 110

SECTION 6
PROCEDURES
Flying the ILS Approach
has forgotten to activate the ILS
DO NOT USE FOR
NAVIGATION
•
Œ
Figure 6-65 Terminal Mode
6-28
ILS approach,
''
••
Ž
GNS 530(A) Pilot's Guide and Reference
1) Within 30 nm of KFLG, the GNS 530 switches
from enroute mode to terminal mode and the
CDI scale transitions from 5.0 to 1.0 nm, full
scale deflection.
2) If the approach has not yet been activated,
(in steps on the preceding page), do so when
cleared for the approach.
3) When approaching the IAF (SHUTR), a
waypoint alert ('NEXT DTK 030°') appears
along the bottom of the screen (Figure 6-66).
Figure 6-66 Waypoint Alert
4) Press the VLOC Flip-flop Key to activate the
ILS frequency. If this step is forgotten, the GNS
530 displays a reminder message (within 3 nm
of the FAF) to activate the ILS frequency.
5) As the distance (DIS) to the IAF approaches
zero, the alert is replaced by a turn advisory
('TURN TO 030°').
6) Fly the outbound course.
7) Approximately one minute past SHUTR
intersection, the alert message 'START PROC
TRN' (Figure 6-67) appears along the bottom
of the screen (if the pilot has not yet begun the
procedure turn).
190-00181-00 Rev. G