Garmin GNS 530 Pilot's Manual And Reference page 158

SECTION 9
VLOC RECEIVER
Turn the large left knob to select the desired
2)
megahertz (MHz) value. For example, the '113'
portion of the frequency '113.00'.
3) Turn the small left knob to select the desired
kilohertz (kHz) value. For example, the '.00'
portion of the frequency '113.00'.
4) To make the standby frequency the active
frequency (Figure 9-3), press the VLOC Flip-
flop Key.
Active VLOC
Frequency Field
VLOC Ident
Window
Figure 9-3 Frequency Moved to Active Field
VLOC Ident Window
with traffic information or configurable data fields, as
9-2
Auto-Tuning
frequency may also be quickly selected from the
database by simply highlighting the desired frequency on
in the standby field, it may be transferred to the active
frequency by pressing the VLOC Flip-flop
To select a VLOC frequency from the VOR
Page or Nearest VOR Page:
1)
2)
3)
GNS 530(A) Pilot's Guide and Reference
ENT Key. This process is
Select the desired page from the main pages
(as discussed in the preceding paragraph).
Press the small right knob momentarily to
activate the flashing cursor
Turn the large right knob to highlight the
frequency for the desired VOR (Figures 9-4 and
9-5).
Figure 9-4 Frequency Highlighted on VOR Page
frequency is selected
190-00181-00 Rev. G