Garmin GNS 530 Pilot's Manual And Reference page 234

SECTION 14
ADDITIONAL FEATURES
Displaying NEXRAD Data on the Map Page
Customizing NEXRAD Data on the Map Page
Customizing the Map Page:
1) Go to the Map Page in the NAV Page Group.
2) Press the MENU Key and select 'Setup Map?'
from the page menu.
3) Select 'Weather' from the GROUP field in the
Map Setup window (Figure 14-23).
Figure 14-23 Map Setup Window
4) Highlight the NEXRAD Symbol field, and use
the small right knob to set the desired map
range at which to overlay NEXRAD data. The
range values are 'Off' to 2000 nm miles. Press
the ENT Key for the desired range selection.
Press the CLR Key to go back to the Map
Page.
5) Highlight the NEXRAD Density field, use the
small right knob to set the density desired
(i.e., the transparency, see Table 14-4) of the
NEXRAD cells.
14-18
Precipitation
Intensity – Map
Configuration
Light Precipitation –
Low
Light Precipitation –
Medium Density
Light Precipitation –
High Density
Moderate Precipitation
– Low & Medium
Density
Moderate Precipitation
– High Density
Heavy Precipitation –
Low & Medium Density
Heavy Precipitation –
High Density
GNS 530(A) Pilot's Guide and Reference
The density values are LOW-MED-HIGH. Press
the ENT Key to make the selection then press
the CLR Key to go back to the Map Page.
Pattern
(sparse dotted area fill)
(dense dotted area fill)
(solid area fill)
(dense dotted area fill)
(solid area fill)
(dense dotted area fill)
(solid area fill)
Table 14-4 NEXRAD Density Patterns
NOTE: If the pilot changes the NEXRAD Density
and/or NEXRAD Symbol fields, these settings
changes also affect the Weather Page. For
example, if the pilot selects 'Low' NEXRAD
Density, both the Weather Page and the Map
Page display the NEXRAD graphics in the 'Low'
mode.
Color
Green
Green
Green
Yellow
Yellow
Red
Red
190-00181-00 Rev. G