Garmin GNS 530 Pilot's Manual And Reference page 227

Manual Override
override automatic operation.
Placing the display into operating mode
from the standby mode (to display TIS
traffic):
1) Press the small right knob to activate the
cursor, and highlight 'STBY'.
2) Turn the small right knob to select 'OPER?'.
3) Press the ENT Key to confirm.
Placing the display into standby mode from
operating mode (to stop displaying TIS
traffic):
1) Press the small right knob to activate the
cursor, and highlight 'OPER'.
2) Turn the small right knob to select 'STBY?'.
Press the ENT Key to confirm.
3)
190-00181-00 Rev. G
Flight Procedures
switches from standby mode to operating mode. The
corner of the display and begins to display traffic on the
use additional vigilance to identify the intruding aircraft.
a voice warning is announced, conduct a visual search
for the intruder. If successful, maintain visual contact
messages and respective pilot responses.
After Landing
switches from operating mode to standby mode. The
both the standby and operating modes can be manually
overridden by the display controls.
GNS 530(A) Pilot's Guide and Reference
SECTION 14
ADDITIONAL FEATURES
14-11