Garmin GNS 530 Pilot's Manual And Reference page 23

Changing the data fields:
1) From the Default NAV page, press the MENU
Key and select 'Change Fields?' (Figure 1-19).
Figure 1-19 Default NAV Page Menu
Turn the large right knob to select the data
2)
field to be changed.
3) Turn the small right knob to display a list of
data options (Figure 1-20).
Figure 1-20 'Select Field Type' Window
4) Press the ENT Key to select the desired data
item and return to the Default NAV Page.
190-00181-00 Rev. G
NAV/COM Page
until the
Frequency
The
any enroute airports which are included in the flight plan,
to function, frequencies are listed for the airport nearest to
the starting position and the destination airport.
Displaying the frequency list for the
desired flight plan or direct-to airport:
1)
2)
3)
GNS 530(A) Pilot's Guide and Reference
INTRODUCTION
Departure, Enroute, or
Arrival Airport
Type
Figure 1-21 NAV/COM Page
Press the small right knob to activate the
cursor on the airport identifier field (in the GPS
Window).
Turn the small right knob to display the list
of airports (departure, arrival, and enroute) for
the flight plan or direct-to. Continue to turn
the small right knob until the desired airport
is selected.
Press the ENT Key to display the frequency list
for the selected airport.
SECTION 1
right knob
Frequency
List
1-13