Garmin GNS 530 Pilot's Manual And Reference page 266

APPENDIX A
DATA CARD USE
To remove the NavData or Terrain data card
(Figure A-2):
1) Gently press on the tab—using a slight
rightward motion—at the front center of the
data card. This partially deploys the swing arm
handle.
Press here to
deploy handle
Figure A-3 Swing Arm Handle Operation
2) Rotate the swing arm handle outward until it
locks into place, perpendicular to the face of
the GNS 530 unit.
3) Grasp the top and bottom surfaces of the
swing arm handle between your thumb and
forefinger, and pull directly away from the
face of the GNS 530 unit to remove the data
card.
A-2 GNS 530(A) Pilot's Guide and Reference
190-00181-00 Rev. G