Garmin GNS 530 Pilot's Manual And Reference page 181

display for optimum viewing in any condition.
backlighting is available which uses
adjustments without any user intervention. The
pilot may also select manual control of the display
contrast and backlighting of the GNS 530' s
display.
runway length and surface type used when
determining the nine nearest airports to display
on the
length and/or surface type may be entered to
prevent airports with small runways, or runways
that are not of appropriate surface, from being
surface type.
select what type of data is displayed in the data
GNS 530 is interfaced with a traffic information
configured for display in the data field.
NOTE: 8.33 kHz VHF communication frequency
channel spacing is not approved for use in the
United States. Select the 25.0 kHz channel
spacing option for use in the United States.
190-00181-00 Rev. G
Setup Page: CDI/Alarms
Setting the airspace warning messages or
changing the altitude buffer:
1)
2)
3)
GNS 530(A) Pilot's Guide and Reference
Select 'CDI/Alarms' from the Setup Page, using
the steps described at the beginning of this
section.
Turn the large right knob to highlight the
'On'/'Off' field next to the desired airspace
type. 'MOAs & Other Airspace' includes military
operation, alert, caution, danger, training, and
warning areas.
Turn the small right knob to select 'On' or 'Off',
as desired (Figure 10-31). Press the ENT Key
to accept the selection.
Figure 10-31 Restricted Alarm Window
SECTION 10
AUX PAGES
10-21