Speaker - Brother FAX1960C Service Manual

6.1.9

Speaker

(1) Disconnect the speaker harness from the main PCB.
(2) Remove screw "a" from the grounding plate S and loosen screw "b" on the main PCB shield.
Then turn the grounding plate in the direction of the arrow shown below.
(3) Pull the speaker and its spring up and out of the lower cover.
Speaker
Speaker harness
Main PCB
Lower cover
Speaker spring
Speaker
6-26
"a"
"b"
Inner frame
"a": Screw, pan (s/p washer) M3x8
"b": Taptite, cup B M3x10
Main PCB
shield
Grounding
plate S
(6_25)
Confidential