Advertisement
Problems due to machine malfunction
Check
Head/carriage unit
Maintenance unit
CIS unit
[ 4 ] Auto document feeder (ADF) malfunction
An ADF failure may occur not only due to machine malfunction but also to the user's actions.
Problems due to the user's actions
Check
Document guides
Possible causes
- Air bubbles, high viscosity ink, or
foreign materials have found their
way into the head/carriage unit.
- Head flat cables are broken.
- The carriage-head flat cable has
not been inserted into the carriage
PCB.
- Air bubbles, high viscosity ink, or
foreign materials get into the
maintenance unit.
- Torque not transmitted.
- Drain tube bent or pinched.
The CIS unit is weak in identifying
colors.
Possible causes
The document guides are not
positioned to match the width of
document(s) loaded.
- Foreign materials have found their
way into ADF.
- The size of the document loaded
is smaller than the specified size.
4-39
Problems that may result
Dot missing occurs on the
printout.
The machine will not be able to
print or drive the head/carriage
unit.
Head cleaning operation will not
be possible and/or the
maintenance unit will not work.
The quality of print colors in
copying operation will be low.
Problems that may result
Documents will skew.
Foreign materials can hinder
document feeding.
The document will jam inside
the ADF.
Confidential
Advertisement
Chapters
Troubleshooting
