Brother FAX1960C Service Manual page 154

Assembling Notes
• Before mounting the document chute ASSY (with the control panel ASSY), make sure that the
following flat cable and harnesses are routed through the cable guides on the document chute as
shown below.
- CIS flat cable
- Scanner motor harness
- Hook switch harness*
- Panel-main harness
Scanner motor harness
Hook switch harness*
Panel-main harness
• When mounting the document chute ASSY (with the control panel ASSY), connect the scanner
motor harness to the relay connector and fit the relay connector in the cable duct as shown below.
Route the scanner motor harness through the cable duct.
Viewed from the rear
Relay connector
Cable duct
Paper feed motor harness
CIS flat cable
Hook switch PCB*
Scanner motor
Control panel ASSY
Scanner motor harness
Scanner motor
relay harness
Lower cover
Document chute ASSY
Document chute ASSY
6-12
*For models with handset
(6_10)
Control panel ASSY
Confidential
(6_10_1)