Brother FAX1960C Service Manual page 103

Error Code
(Hex)
8F The paper feed motor is
being driven and cannot be
stopped.
90-A0 Not used.
A1 Ink cartridge cover is open.
Upper jam clear cover is
open.
A2 Document length exceeding
the scan limitation.
During scanning, a
document of 90 cm or
longer is detected.
During document feeding or
ejecting, a document of 400
cm or longer is detected.
The document rear sensor
A3
does not come ON during
document pull-in operation.
Not used.
A4
Symptom
4-17
Probable Cause
Software malfunction
Ink cartridge cover/
upper jam clear cover
switch broken
Ink cartridge cover/
upper jam clear cover
switch actuator
unhooked
Main PCB defective
Document jam
Foreign materials in the
machine
Document rear sensor
actuator caught on the
surrounding parts
Document rear sensor
broken
Main PCB defective
Document jam
Foreign materials in the
machine
Document rear sensor
actuator caught on the
surrounding parts
Document rear sensor
broken
Main PCB defective
Solution
Open and close the upper
jam clear cover.
Unplug and plug the AC
cord.
Replace the ink cartridge
cover switch.
Set the ink cartridge cover
switch actuator into place.
Replace the main PCB.
Remove the jammed
document.
Remove foreign materials.
Correct the surrounding
parts on which the
actuator caught.
Replace the document
rear sensor PCB.
Replace the main PCB.
Remove the jammed
document.
Remove foreign materials.
Correct the surrounding
parts on which the
actuator caught.
Replace the document
rear sensor PCB.
Replace the main PCB.
Confidential