Top Cover Lock Spring; Speaker And Cover Sensor Pcb - Brother MFC7050C Service Manual

1.14 Top Cover Lock Spring

(1) Remove the screw and take out the top cover lock spring.

1.15 Speaker and Cover Sensor PCB

(1) Turn the upper cover upside down.
(2) Take out speaker harness from the three guides and pull up the speaker.
(3) Remove the screw and lift up the speaker spring.
(4) Take out the cover sensor harness from the three guides and unhook the cover sensor PCB.
n n
Reassembling Notes
• When setting the speaker back into place, angle the speaker harness downwards at 45° as
shown above.
IV - 31