Sony DVW-A500P/1 Operation Manual page 159

Menu List
Item number Item
K44 CUE MENU
DEFAULT MODE
SEL
K45
CUE MENU PRE-
ROLL OFFSET
K46
POWER-ON
MENU SELECT
Item assignable to PF1 and PF2 menus are items 001
to 910, K1 to K46 which are included in the VTR
SETUP menu, and K61 to K76 described below. They
all appear in the PF ASSIGN menu.
Item number Item
ASSEMBLE
K61
K62 INS TC
K63
INS VIDEO
K64
INS A-CH1
K65
INS A-CH2
K66
INS A-CH3
K67
INS A-CH4
K68
INS A-CH CUE
K69 FREEZE
K70 DMC
K71
P-PLAY
K73
LAST EDIT
K74
TIMER RESET
K75
TIMER SET
K76
TIMER HOLD
A-42
Appendix
Settable range Function
[0] [page mode]
Selects the default mode to be activated when you activate
1 extend mode
the CUE menu.
0: PAGE mode
1: EXTEND mode
[0]
[0 sec] Specifies the preroll time to a cue point.
1 1 sec You can set a preroll time of 0 to 30 seconds in 1-second
units.
I
I
30
30 sec
[0] [HOME menu]
Selects the menu to be activated automatically when you
1 turn on the power.
TC menu
2 CUE menu
3 PF1 menu
4 PF2 menu
Item K61 to K76 does not appear in the VTR SETUP
menu, and the settings of these items return to their
factory settings when you turn the power off.
Function
Selects assemble editing.
Selects the insert channel(s) for insert editing.
A still-picture is output when you press the function button which this item is registered.
Register this item to a function button in the PF1/2 menu and press the button to
record, automatically play and automatically edit a signal played back at speed
between –1 to +3 times normal playing speed.
Resets the internal time code generator.
CTL: The time data display becomes 00H00M00S00F and all edit points are erased.
TC or UBIT: The time data display becomes 00H00M00S00F (TC) or 00 00 00 00
(UBIT). Edit points are not affected.
Register this item to a function button in the PF1/2 menu and press the button to set
the desired time code or user bits.
Register this item to a function button in the PF1/2 menu and press the button to stop
advancing the time data.