Sony DVW-A500P/1 Operation Manual page 129

Menu List
Item number Item
109 FORCED EE
WHEN TAPE
UNTHREAD
111
PROGRAM
PLAY
PHASE LOCK IN
115
VARIABLE × 3
(DVW-A500/1
and A500P/1)
116 JOG DIAL
RESPONSE
117 CONTROL
PANEL
SELECTION
A-12
Appendix
Settable range Function
[on]
[0] Specifies whether the unit automatically changes to PB/EE
off mode whenever PB/EE is selected with the ALT/[F2] (PB/
1
EE) button on the lower control panel during tape threading
and unthreading modes and when tape is not inserted.
0: The ALT/[F2] (PB/EE) button in the HOME menu does
1: The ALT/[F2] (PB/EE) button in the HOME menu controls
Specifies whether program play mode is enabled or not.
[0] [disable]
1 enable 0: Program play mode is disabled.
1: Program play mode is enabled.
[0] [off] Specifies whether the capstan phase servo is locked during
1 on the variable-speed mode of 3 times normal speed.
0: Capstan phase servo is not locked during the variable-
1: Capstan phase servo is locked during the variable-speed
[0] [TYPE 1]
Selects the tape speed (VTR command) characteristics for
1 TYPE 2 search dial rotation.
2 TYPE 3
0: Tape speed changes linearly in a range of –1 to +1 times
1: Tape speed changes in a range of –3 to +3 times normal
2: Tape speed changes linearly in a range of –3 to +3 times
[sw selection EXT ] Specifies which control panel is enabled when the
[0]
( )
parallel control CONTROL PANEL switch on the system setup panel is set
1
to 'EXT'.
0: Only the control panel that is connected to the external
1: Both the control panel of this unit and the equipment
not control the PB/EE mode.
(The E-E mode signal is output at all times.)
the PB/EE mode.
speed mode of 3 times normal speed.
mode of 3 times normal speed.
normal tape speed.
tape speed as shown below in TYPE 2. (Tape speed
does not change when the search dial is within a range
of ±1 times normal tape speed.)
normal tape speed as shown below in TYPE 3.
TYPE2
speed
FWD
+3
+1
RVS FWD
-1
rotation
-3
RVS
control connector on the connector panel is enabled.
connected to the external control connector on the
connector panel are enabled.
TYPE3
speed
FWD
+3
RVS FWD
rotation
-3
RVS