Items Related To Operation Panels (100S - Sony DVW-A500P/1 Operation Manual

Menu List

Items Related to Operation Panels (100s)

The values enclosed in a box one factory settings.
Item number Item
101
SELECTION
FOR SEARCH
DIAL ENABLE
102 MAXIMUM TAPE
SPEED
(DVW-A500/1)
102 MAXIMUM TAPE
(DVW-A500P/1) SPEED
103 AUDIO SELECTED
(DVW-A500/1 LINE OUT
and A500P/1)
A-10
Appendix
Settable range Function
[0]
[dial direct] Determines how the unit is set to search mode.
1
via search key
0: The unit enters search mode when you rotate the search
1: The unit enters search mode when you press the
[0] Selects the maximum analog Betacam tape speed in
[ 35] ×
×35 (shuttle ×24)
1 search mode.
×24
2
Note
The maximum digital Betacam tape speed in search mode
is 50 times normal tape speed no matter what this setting is.
0: 35 times normal tape speed in shuttle mode using the
1: 35 times normal tape speed during fast forward and
2: 24 times normal tape speed in shuttle mode using the
×
[0] [ 42] Selects the maximum analog Betacam tape speed in
×42 (shuttle ×24)
1 search mode.
×24
2
Note
The maximum digital Betacam tape speed in search mode
is 50 times normal tape speed no matter what this setting is.
0: 42 times normal tape speed in shuttle mode using the
1: 42 times normal tape speed is the maximum tape speed
2: 24 times normal tape speed in shuttle mode using the
[0]
[manual]
Selects the audio signal output to the MONITOR OUTPUT
1
auto AFM/LNG connectors.
select
0: The audio signal selected by the AUDIO INPUT/
2
auto LNG select
1: The AFM audio (CH-3 and CH-4) is selected during
2: The audio signal selected by the AUDIO INPUT
dial in all modes except recording and edit modes.
SHUTTLE, JOG or VAR button.
search dial and during fast forward and rewind.
rewind. 24 times normal tape speed in shuttle mode
using the search dial.
search dial and during fast forward and rewind.
search dial and during fast forward and rewind.
during fast forward and rewind. 24 times normal tape
speed in shuttle mode using the search dial.
search dial and during fast forward and rewind.
MONITOR SELECT buttons on the upper control panel
or the[F9](MON-L SEL) or [F10](MON-R SEL) button in
the PF2 menu factory setting) is output to the MONITOR
OUTPUT connectors.
metal tape playback. The LNG audio (CH-1 and CH-2) is
selected during oxide tape playback. Signal output is in
stereo.
MONITOR SELECT buttons on the upper control panel
or the [F9] (MON-L SEL) or [F10] (MON-R SEL) button in
the PF2 menu (factory setting) is output to the MONITOR
OUTPUT connectors. When the AFM audio is selected,
the LNG audio is output to the MONITOR OUTPUT
connector automatically when the variable speed
playback mode is activated.