Items Related To Editing (300S - Sony DVW-A500P/1 Operation Manual

Items Related to Editing (300s)

The values enclosed in a box are factory settings.
Item number Item
301 VAR SPEED
RANGE FOR
SYNCHRONIZATION
302 CAPSTAN
RE-LOCKING
DIRECTION
304
EDIT FIELD
SELECT
305 SYNC GRADE
306 DMC INITIAL
SPEED
Settable range Function
Specifies the variable tape speed range when the variable
[0] [–1 to +3]
speed playback is executed by a remote control unit
1 –1.15 to +3.45
connected to the REMOTE1 IN (9P) connector.
0 : –1 to +3 times normal tape speed
1 : –1.15 to +3.45 times normal tape speed
Note
When an editing control unit such as BVE-9000 is
connected for DT editing, select "1".
When "1" is selected and the DT playback at a speed
exceeding –1 to +3 times nomal tape speed is attempted
during analog Betacam playback, the bottom of the picture
may partially disappear. This is not a malfunction.
[deceleration]
Specifies whether capstan servo is re-locked in
[0]
acceleration deceleration mode or acceleration mode when the ALT/[F5]
1
(DVW-A500/1 and (CAP LOCK) button in the HOME menu is set to 4FD
500/1)
(DVW-A500/1 and 500/1) or 4FD or 8FD (DVW-A500P/1
deceleration and 500P/1) .
0
[acceleration]
0 : Capstan servo re-locks in deceleration mode.
[1]
(DVW-A500P/1 and
1 : Capstan servo re-locks in acceleration mode.
500P/1)
Specifies the timing for the start of editing in an edit mode.
[0] [1F]
0 : Tape editing starts from field 1 and ends at field 2.
1 2F
1 : Tape editing starts from field 2 and ends at field 1.
2 1F/2F
2 : Tape editing is carried out according to the timing of
[0] [accurate]
Specifies the editing accuracy when performing editing in
1 rough phase-synchronized mode when the item 004 is set to "0".
0 : Editing accuracy of ±0 frame
1 : Editing accuracy of ±1 frame
For details on item 004, refer to page A-8.
[00] [manual]
Specifies the initial tape speed that is set automatically
01 play
during DMC (Dynamic Motion Control) editing.
02 still
00 : The initial tape speed is determined by the rotation
03 +0.03
04 +0.1
01 : Normal playback speed
05 +0.2
02 : Tape is stopped.
06 +0.5
03 to 13 : The initial tape speed is the selected search
07 +1
08 +2
09 –0.03
10 –0.1
11 –0.2
12 –0.5
13 –1
commands.
angle of the search dial.
speed.
A-15
Appendix