Items Related To The Video Control (700S - Sony DVW-A500P/1 Operation Manual

Menu List

Items Related to the Video Control (700s)

The values enclosed in a box are the factory settings.
Item number Item
SELECTION OF
701
VIDEO/SYNC
DELAY
703 BLANK LINE
(DVW-A500/1
SELECT
and 500/1)
Sub item
0
All Line
12
Line 12
I
I
Line 19
19
20
Line 20
703 BLANK LINE
(DVW-A500P/1
SELECT
and 500P/1)
Sub item
0 All Line
9
Line 9
I I
22 Line 22
23 Line 23
A-24
Appendix
Settable range Function
[sync delay]
[0] In E-E mode, the video output signal is delayed with
video delay respect to the input signal by a duration equal to the time
1
required for video circuit processing (6H). This item
specifies whether the sync signal is delayed by the same
amount as the video output signal, or is output with the
same timing as the input signal when outputting video
signal with the sync signal.
0: Sync signal is delayed.
1: Sync signal is not delayed.
Specifies whether blanking is on or off during the vertical
blanking of the video signal.
The lines that are blanked can be individually specified.
The Y/C signal and ODD/EVEN field are blanked
simultaneously.
[– – –] 0: Blanking is specified for each line.
[0]
1: All lines selectable by this menu item are blanked, no
1 blank
throu
2
2: All lines selectable by this menu item are not blanked, no
[blank]
[0]
0: Blanked
throu
2 2: Not blanked
[0]
[blank]
0: Blanked
1
half
1: Half-blanked
2
throu
2: Not blanked
Note
For analog Betacam VTRs (i.e., Betacam SP):
Blanking can be specified for lines 12 to 20. The chroma
signal, however, is automatically blanked for lines 12 to 15
(even if blanking of the luminance signal is cancelled).
Specifies whether blanking is on or off during the vertical
blanking of the video signal.
The lines that are blanked can be individually specified.
The Y/C signal and ODD/EVEN field are blanked
simultaneously.
[– – –]
[0] 0: Blanking is specified for each line.
blank
1 1: All lines selectable by this menu item are blanked, no
throu
2
2: All lines selectable by this menu item are not blanked, no
[blank]
[0] 0: Blanked
throu
2 2: Not blanked
1: Half-blanked
[1]
[half]
2: Not blanked
2
throu
Notes
• For digital Betacam VTRs:
Blanking can be specified for lines 9 to 23. Line 23,
however, is half-blanked.
• For analog Betacam VTRs (i.e., Betacam SP):
Blanking can be specified for lines 12 to 21. The chroma
signal, however, is automatically blanked for lines 12 to
15 (even if blanking of the luminance signal is cancelled).
Line 23 is half-blanked.
matter what the other sub item settings are.
matter what the other sub item settings are.
matter what the other sub item settings are.
matter what the other sub item settings are.