Safety Alert Messages-Cylinder And Processing Hazards - Milnor MWF63C Series Maintenance Manual

Safety
2.1.2 Safety Alert Messages—Cylinder and Processing
Hazards
The following are instructions about hazards related to the cylinder and laundering process.
DANGER:
cylinder.
Do not operate the machine with a malfunctioning door interlock.
�
Open pocket machines only—Do not jog the cylinder and pull the goods at the same
�
time.
Open pocket machines only—Keep yourself and others clear of cylinder and goods
�
during jogging operation.
Do not operate the machine with malfunctioning two-hand manual controls.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
WARNING: Crush Hazards — Contact with the turning cylinder can crush your limbs.
Do not place any object in the turning cylinder.
�
Do not operate the machine with a malfunctioning door interlock.
�
Open pocket machines only—Keep yourself and others clear of cylinder and goods
�
during jogging operation.
Do not operate the machine with malfunctioning two-hand manual controls.
�
WARNING: Confined Space Hazards — Confinement in the cylinder can kill or injure
6
Entangle and Sever Hazards — Contact with goods being processed can
cause the goods to wrap around your body or limbs and dismember you.
The goods are normally isolated by the locked cylinder door.
Do not attempt to open the door or reach into the cylinder until the cyl-
�
inder is stopped.
Do not touch goods inside or hanging partially outside the turning
�
The cylinder will repel any object you try to stop it with, possibly causing
the object to strike or stab you. The turning cylinder is normally isolated
by the locked cylinder door.
Do not attempt to open the door or reach into the cylinder until the cyl-
�
inder is stopped.
you. Hazards include but are not limited to panic, burns, poisoning, suffo-
cation, heat prostration, biological contamination, electrocution, and
crushing.
Do not attempt unauthorized servicing, repairs, or modification.
�
BNWHTS03.C03 0000235025 A.5 A.2 A.3 1/2/20 2:19 PM Released
Pellerin Milnor Corporation