Safety - Rigid Washer Extractors; Safety Alert Messages-Internal Electrical And Mechanical Hazards; Safety Alert Messages-Cylinder And Processing Hazards - Milnor 30015T6X Installation Manual

BNWRUS08 / 2019335
Safety — Rigid Washer Extractors
Safety Alert Messages—Internal Electrical and Mechanical
Hazards
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
Keep yourself and others off of machine.
�
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
Safety Alert Messages—Cylinder and Processing Hazards
The following are instructions about hazards related to the cylinder and laundering process.
DANGER:
cylinder.
Do not operate the machine with a malfunctioning door interlock.
�
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
Pellerin Milnor Corporation
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not unlock or open electric box doors.
�
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
Keep yourself and others off of machine.
�
Entangle and Sever Hazards — Contact with goods being processed can
cause the goods to wrap around your body or limbs and dismember you.
The goods are normally isolated by the locked cylinder door.
Do not attempt to open the door or reach into the cylinder until the cyl-
�
inder is stopped.
Do not touch goods inside or hanging partially outside the turning
�
BNWRUS08 0000249979 B.3
BNWRUS08.C01 0000249978 D.2 B.3 A.3 1/2/20 2:19 PM Released
BNWRUS01.C03 0000234538 D.2 B.3 A.6 1/2/20 2:19 PM Released
BNWRUS03.C03 0000234586 D.2 B.3 A.4 1/2/20 2:19 PM Released
General Information
1/2/20 2:19 PM Released
7