Brother HL-L3230CDW Online User's Manual page 331

Level 3 Level 4
Colour Colour Settings Blue
Correction
[All Settings] > [Network]
Level 3 Level 4
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default
Wired Enable
WLAN TCP/IP
Level 5
Level 5 Level 6
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the secondary DNS server's IP
APIPA -
IPv6 -
- -
- -
- -
- -
- -
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Descriptions
Adjust the blue colour.
Descriptions
Choose the IP method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
WINS server.
Specify the primary DNS server's IP
address.
address.
Allocate the IP address from the link-local
address range automatically
Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Choose the Ethernet link mode.
Display the Ethernet link status.
Display the MAC address of the machine.
Restore wired network settings of your
machine to the factory settings.
Turn the wired interface on or off.
Choose the IP method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
WINS server.
Specify the primary DNS server's IP
address.
1
.
326