Brother HL-L3230CDW Online User's Manual page 323

Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default -
Wired Enable
WLAN TCP/IP
Setup Wizard
WLAN Assistant -
WPS
Level 3 Level 4
WINS -
Config
WINS Primary
Server
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
- -
- -
-
- -
Boot -
Method
IP Address -
Subnet -
Mask
Gateway
-
Node Name -
WINS -
Config
WINS Primary
Server
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
-
- -
Descriptions
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS server.
server.
Allocate the IP address from the link-local address
1
range automatically .
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother support
website at support.brother.com.
Choose the Ethernet link mode.
Display the Ethernet link status.
Display the MAC address of the machine.
Restore wired network settings of your machine to
the factory settings.
Turn the wired interface on or off.
Choose the IP method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS server.
server.
Allocate the IP address from the link-local address
1
range automatically .
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs &
Troubleshooting page on the Brother support
website at support.brother.com.
Configure the wireless network settings using the
setup wizard.
Configure your wireless network settings using the
Brother installation disc.
Configure your wireless network settings using the
one-button push method.
318