Brother HL-L3230CDW Online User's Manual page 322

Level 2
HP LaserJet
BR-Script 3
ColourCorrection
[Network]
For wired and wireless network models
Level 1 Level 2
Wired LAN TCP/IP
Level 3 Level 4
Right Margin -
Top Margin -
Bottom Margin -
Lines -
Tray Command -
Error Print -
CAPT -
Calibration Calibrate
Reset
Registration -
Auto Correction -
Colour Settings Setting Mode Select whether to apply the colour print settings
Colour Mode
Improve Gray Turn on or off to improve the image quality of
Enhance
Black
Brightness
Contrast
Red
Green
Blue
Level 3
Boot
Method
IP Address -
Subnet
Mask
Gateway
Node Name
Description
Set the right margin at column 10 to 80
columns at 1 cpi.
Set the top margin distance from the top edge
of the paper.
Set the bottom margin distance from the bottom
edge of the paper.
Set the number of lines on each page.
Select this setting if a tray mismatch appears
when you use the HP drivers.
Choose whether the machine prints the error
information when errors occur.
Use CAPT (Colour Advanced Printing
Technology) for optimal print quality when
printing a PS file created by a non-Brother PS
driver.
Colours and photos appear clearer and more
accurate. Print speed will be slower.
Initiate colour calibration to check and correct
colours.
Reset the calibration parameters to the default
settings.
Align the print position of each colour.
Set the machine to perform Colour Calibration
and Registration automatically.
of the machine or the printer driver.
Select the colour mode.
shaded areas.
Turn on or off if a black graphic does not print
correctly.
Adjust the brightness.
Adjust the contrast.
Adjust the red colour.
Adjust the green colour.
Adjust the blue colour.
Level 4 Descriptions
- Choose the IP method that best suits your needs.
Enter the IP address.
- Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
317