Brother HL-L3230CDW Online User's Manual page 324

Level 1 Level 2
WLAN WPS w/PIN Code -
WLAN Status
MAC Address
Set to Default -
WLAN Enable
Wi-Fi Push Button
Direct
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
Network -
Reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static', you must manually enter an IP address from the machine's control panel.
[Network]
For wireless network models
Level 1 Level 2
WLAN TCP/IP
Level 3 Level 4
-
Status -
Signal -
Channel -
Speed -
SSID -
Comm. Mode -
- -
-
- -
- -
- -
- -
- -
Device -
Name
SSID -
IP Address -
Status -
Signal -
Channel -
Speed -
- -
- -
Level 3 Level 4
Boot -
Method
IP Address -
Descriptions
Configure the wireless network settings using
WPS with a PIN code.
Display the wireless Ethernet link status.
Display the signal condition.
Display the channel in use when Status is
Active.
Display the connection speed when Status is
Active.
Display SSID.
Display the current Communication mode.
Display the MAC address of the machine.
Restore wireless network settings of your machine
to the factory settings.
Turn the wireless interface on or off.
Configure your Wi-Fi Direct network settings using
the one-button push method quickly.
Configure your Wi-Fi Direct network settings using
WPS with a PIN code quickly.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Display the channel in use when the Status is
G/O Active or Client Active.
Display the connection speed when the Status is
G/O Active or Client Active.
Enable or disable the Wi-Fi Direct connection.
Restore all network settings of your machine to
the factory settings.
Descriptions
Choose the IP method that best suits your needs.
Enter the IP address.
319