Brother HL-L3230CDW Online User's Manual page 300

Home > Routine Maintenance
Calibrate Colour Output
The output density for each colour may vary depending on the machine's environment, including factors like
temperature and humidity. Calibrating your machine helps improve the output colour density.
If you are using the Mac printer driver, the printer driver automatically retrieves the calibration data. To
retrieve the data manually, you must perform the calibration using Brother's Status Monitor.
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
1. Press a or b to select the [Printer] option, and then press OK.
2. Press a or b to display the [ColourCorrection] option, and then press OK.
3. Press a or b to display the [Calibration] option, and then press OK.
4. Press a or b to display the [Calibrate] option, and then press OK.
5. Press a to select [Yes].
Calibration starts automatically, and will take a few minutes.
6. Press Cancel.
HL-L3270CDW
1. Press [Toner] > [Calibration] > [Calibrate].
2. Press [Yes].
Calibration starts automatically, and will take a few minutes.
3. Press .
Related Information
• Routine Maintenance
• Reset the Machine's Calibration Settings
Related Topics:
• Error and Maintenance Messages
• Improve the Print Quality
• Monitor the Status of the Machine from Your Computer (Windows)
• Monitor the Status of the Machine from Your Computer (Mac)
> Calibrate Colour Output
295