Brother HL-L3230CDW Online User's Manual page 260

Home > Troubleshooting
Factory Reset
Use the Factory Reset function to restore all settings back to the factory settings.
Unplug all the interface cables before you perform a Factory Reset.
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
1. Press a or b to select the [Initial Setup] option, and then press OK.
2. Press a or b to select the [Reset] option, and then press OK.
3. Press a or b to select the [Factory Reset] option, and then press OK.
4. Press a to select [Reset].
5. Press a to restart the machine.
HL-L3270CDW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Reset] > [Factory Reset].
2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
3. Press .
Related Information
• Reset Functions
> Reset Functions > Factory Reset
Description
The machine will exit without rebooting.
255