Brother HL-L3230CDW Online User's Manual page 320

Home > Machine Settings
Tables > Settings Tables (HL-L3210CW/HL-L3230CDW)
Settings Tables (HL-L3210CW/HL-L3230CDW)
Related Models: HL-L3210CW/HL-L3230CDW
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
[General Setup]
Level 1 Level 2
Tray Setting Paper Type
Paper Size
Check Size
Manual Feed
Ecology Eco Mode
Toner Save
Sleep Time
Quiet Mode
Auto Power Off -
Panel Control Button Repeat
Message Scroll -
LCD Contrast
Auto Online
Setting Lock -
Interface Select
Auto IF Time
Input Buffer
Delete Storage Macro ID
Font ID
Format
[Printer]
Level 2
Emulation
> Change Machine Settings from the Control Panel
Level 3 Description
- Set the type of paper in the paper tray.
- Set the size of paper.
- Select whether to display a message telling you to check that the
size of the paper in the machine and the machine's Paper Size
setting match.
- Select whether to print from the Manual Feed Slot.
- Turn the following machine settings on at the same time.
•
•
- Increase the page yield of the toner cartridge.
- Set how much time will pass before the machine enters Power
Saving mode.
- Decrease printing noise.
Set the number of hours that the machine will remain in Deep
Sleep mode before going into Power Off mode.
- Set the time for the LCD message to change when holding a or b
at intervals.
Set the time in seconds that an LCD message will scroll across the
LCD. From Level 1=0.2 s to Level 10=2.0 s.
- Adjust the contrast of the LCD.
- Set the machine to return to Ready mode after it has been idle for
30 seconds.
- Lock your machine's settings using the Setting Lock password.
- Select the interface to use.
If you select Auto, the machine changes the interface to USB or
Network depending on which interface is receiving data.
- Set the time-out period for the auto interface selection.
- Increase or decrease the input buffer capacity.
- Delete the registered Macro data.
- Delete the registered Font data.
- Restore the Macro and Font data of your machine to the default
settings.
Level 3 Level 4
- -
2-sided Print: Long Edge (Available only for certain
models)
Sleep Time: 0Min
Description
Choose the emulation mode.
> Settings and Features
315