Brother HL-L3230CDW Online User's Manual page 259

Home > Troubleshooting
Network Reset
Use the Network Reset function to restore the print server's network settings, such as password and IP address,
back to its default factory settings.
• Unplug all the interface cables before you perform a Network Reset.
>> HL-L3210CW/HL-L3230CDW
>> HL-L3270CDW
HL-L3210CW/HL-L3230CDW
1. Press a or b to select the [Initial Setup] option, and then press OK.
2. Press a or b to select the [Reset] option, and then press OK.
3. Press a or b to select the [Network Reset] option, and then press OK.
4. Press a to select [Reset].
5. Press a to restart the machine.
HL-L3270CDW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Reset] > [Network Reset].
2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
3. Press .
Related Information
• Reset Functions
> Reset Functions > Network Reset
Description
The machine will exit without rebooting.
254