Install Differential Gear - Ariens Power Brush 28 Service Manual

Install Differential Gear

1. Align differential gear with pinion gear and reinstall
onto axle. See Figure 67.
See Figure 68.
2. Slide long axle back into differential and continue until
fully seated.
3. Position sleeve bushing and flat steel washer against
frame and reinstall roll pin into axle.
4. Reinstall E-ring onto axle end.
Figure 67
Figure 68
5. Reinstall bottom cover and secure with six hex bolts.
6. Position axles keys and reinstall wheels. Secure
wheels with snap clips.
7. Rotate tractor to operating position, support handlebar
and reinstall brush attachment. See Install Brush to
Frame on page 9.
8. Fill fuel tank and reconnect spark plug wire.
EN – 33