Install Interlock Cams - Ariens Power Brush 28 Service Manual

IMPORTANT: Interlock cams will fall from camshafts in
next step.
6. Remove hardware retaining camshafts and remove
camshafts from interlock bracket. See Figure 75.
Figure 75

Install Interlock Cams

IMPORTANT: Ensure that nylon bushings are seated in
interlock bracket. See Figure 76.
1. Reinstall right camshaft through interlock bracket and
secure to clutch lever with original tapping screw.
2. Install interlock cam onto camshaft so flat edge is
positioned downward and secure with spring clip. See
Figure 77.
EN – 36
Figure 76
Figure 77