Ariens SNO-THRO 32042 - ST624E Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Ariens Manuals
  4. Snow Blower
  5. SNO-THRO 32042 - ST624E
  6. Owner's/operator's manual

Ariens SNO-THRO 32042 - ST624E Owner's/Operator's Manual

Ariens snow blower user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Sno-Thro
Owner/Operator Manual
Models
932040 - ST5520E
932041 - ST7524E
932042 - ST624E
932140 - ST5520E
932141 - ST7524E
932509 - ST7524
932510 - ST5520
932511 - ST624
Transfer
Coller l'autocollant du
model &
modèle et du numéro de
serial number
série dans cet encadré.
label from
Transferir aquí la etiqueta
product
del modelo y número de
registration
serie del registro del
here.
producto.
®
ENGLISH
FRANÇAIS
ESPAÑOL
U.S. Patents Pending
00429300B 7/05
Printed in USA

Advertisement

Table of Contents
loading

Related Manuals for Ariens SNO-THRO 32042 - ST624E

Summary of Contents for Ariens SNO-THRO 32042 - ST624E

  • Page 1 Sno-Thro Owner/Operator Manual Models 932040 - ST5520E 932041 - ST7524E 932042 - ST624E 932140 - ST5520E 932141 - ST7524E 932509 - ST7524 932510 - ST5520 932511 - ST624 ENGLISH FRANÇAIS ESPAÑOL Transfer Coller l’autocollant du model & modèle et du numéro de serial number série dans cet encadré.
  • Page 2 Facsimile (920) 756-2407 We the undersigned, ARIENS COMPANY, certify that: Nous, soussignés ARIENS COMPANY, certifions que : Der Unterzeichnete, ARIENS COMPANY, bescheinigt, dass: La sottoscritta società ARIENS COMPANY certifica che: Nosotros, los abajo firmantes, ARIENS COMPANY, certificamos que: Undertegnede, ARIENS COMPANY, bekrefter at: Undertecknad, ARIENS COMPANY, intygar att: Allekirjoittanut, ARIENS COMPANY, vakuuttaa, että: My, niŸej podpisani, ARIENS...
  • Page 3 – Vibrasjonsmåling ved brukerens hender – Vibrationsmätning vid förarens händer – Tärinä kuljettajan käsissä – Pomiar wibracji (m/sec ) na rêkach operatora – Hodnota vibrací (m/s rukou obsluhy Ariens Company Brillion, WI 54110-0157 USA Signature Signature Unterschrift Firma Firma Signatur Namnteckning Allekirjoitus Podpis Podpis ) in dB –...

  • Page 4: Table Of Contents

    WARRANTY......27 INTRODUCTION PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information.

  • Page 5: Safety

    Ariens Dealer for assistance. Make sure all assembly has been properly completed. NOTE: To locate your nearest Ariens Dealer, call 1-920-756-4664 or go to www.ariens.com on the internet. WARNING: To avoid injury to hands and feet,...

  • Page 6: Safety Decals And Locations

    SAFETY DECALS AND LOCATIONS ALWAYS replace missing or damaged Safety Decals. Refer to figure below for Safety Decal locations. Figure 2 1. WARNING! Read Owner/Operator Manual. OL1801 Keep people away from unit while operating. Keep children out of work area and under watchful care of a responsible adult.
  • Page 7 Avoid uneven and rough terrain. DO NOT operate near drop-offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in. Falling snow, fog, etc. can reduce vision and cause an accident.
  • Page 8 DO NOT operate on steep slopes. DO NOT clear snow across the face of slopes. Keep all movement on slopes slow and gradual. DO NOT make sudden changes in speed or direction. Use a slow speed to avoid stops or shifts on slopes. Avoid starting or stopping on a slope.

  • Page 9: Assembly

    WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. WARNING: Dropping or tipping over boxed unit could result in personal injury or damage to unit. PACKAGE CONTENTS 1. Sno-Thro Unit 4. Literature Pack with Extra Shear Bolts 2.
  • Page 10 1. Mounting Hardware 3. Discharge Chute Ring 2. Discharge Chute 4. Chute Pedestal Figure 5 Install Discharge Chute Crank (932041, 042, 141, 509, 510, 511) 1. If necessary, position the crank support bracket as shown in Figure 6. 2. Slide chute crank through crank support bracket. 3.

  • Page 11: Controls And Features

    Figure 7 CONTROLS AND FEATURES 1. Attachment Clutch Lever 2. Speed Selector 3. Traction Drive Clutch Lever 4. Chute Crank (932041, 042, 141, 509, 510, 511) 5. Muffler Guard (932041, 042, 141, 509, 510, 511) 6. Discharge Chute Deflector 7. Discharge Chute 8.

  • Page 12: Operation

    WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. WARNING: To avoid injury to hands and feet, always disengage clutches, shut off engine, and wait for all movement to stop before unclogging or working on snow thrower. Keep hands and feet away from auger and impeller.
  • Page 13 Snow Clean-Out Tool (Figure 8) WARNING: Hand contact with the rotating impeller is the most common cause of injury associated with snow throwers. Never use your hand to clean out the discharge chute. Figure 8 To clear the chute: 1. Shut off the engine. 2.

  • Page 14: Filling Fuel Tank

    FILLING FUEL TANK WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. Fuel Shut-Off Valve IMPORTANT: The fuel shut-off valve MUST be in the closed position prior to transporting the unit. The fuel shut-off valve has two positions: •...

  • Page 15: Snow Removal

    5. Set throttle to proper starting position. 6. Insert key into ignition switch and push into RUN position. DO NOT twist key after it is inserted. 7. Grasp starter handle and pull rope out slowly until it pulls harder. Let rope rewind slowly. 8.

  • Page 16: Maintenance

    Ariens Dealers will provide any service or adjustments which may be required to keep your unit operating at peak efficiency. Should engine service be required, contact an Ariens dealer or an authorized engine manufacturer's service center. WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.
  • Page 17 2. Add lubricant if required. Allow oil to drain to level of plug and replace plug. IMPORTANT: Use only Ariens special gear lubricant L-2 (Part Number 00008000). Gearcase filler plug may require an application of thread sealant with repeated servicing.

  • Page 18: Service And Adjustments

    3. Reposition scraper blade flush with runners and tighten lock nuts. SHEAR BOLTS IMPORTANT: Use only Ariens shear bolts for replacement. Use of any other type of shear bolt may result in severe damage to unit. Occasionally a foreign object may enter the...

  • Page 19: Speed Selector Adjustment

    DISCHARGE CHUTE If chute does not stay in position while operating, tighten nut on carriage bolt at pivot point to increase tension on spring (Figure 17). 1, 2 1. Carriage Bolt 2. Spring Figure 17 SPEED SELECTOR ADJUSTMENT To adjust (Figure 18): 1.
  • Page 20 CAUTION: Always support Sno-Thro frame and housing when loosening the cap screws holding them together. Never loosen cap screws while unit is in service position. IMPORTANT: To avoid bending bottom cover, when tipping unit apart, support handlebars firmly or tip unit up on housing and remove bottom cover by removing four cap screws before separating unit.

  • Page 21: Traction Drive Belt Replacement

    TRACTION DRIVE BELT REPLACEMENT NOTE: Housing and frame must be tipped apart and attachment drive belt removed from engine sheave in order to change traction drive belt (Figures 19 and 20). CAUTION: Always support Sno-Thro frame and blower housing when loosening the cap screws holding them together.

  • Page 22: Traction Drive Clutch Adjustment

    Attachment Clutch Lever 6 in. - 7 in. (15,2 cm - 17,8 cm) Figure 23 4. Adjust attachment clutch lever measurement, if necessary. a. Loosen attachment idler nut (Figure 20). b. To increase distance between clutch lever and handlebar, move the idler towards the attachment belt.
  • Page 23 1. Traction Clutch Cable 6. Speed Selector Arm 2. Shift Rod 7. Adjustment Pivot Pin 3. Attachment Control 8. Cotter Pin and Clevis Cable 9. Jam Nut 4. Mounting Nuts 10.Traction Drive Clutch 5. Attachment Clutch 11.Adjustment Barrel Figure 26 FRICTION DISC REPLACEMENT Remove Friction Disc (Figure 27):...

  • Page 24: Storage

    53200500 Shear Bolts 03248300 Friction Disc To obtain a complete parts manual, find your model and serial number. Then go to www.ariens.com or call 1-920-756-4664. ACCESSORIES See your authorized Ariens dealer to add the additional accessories available to your Sno-Thro.

  • Page 25: Troubleshooting

    PROBLEM PROBABLE CAUSE 1. Fuel tank is empty. Engine will not crank/start. 2. Fuel shut-off valve closed. 3. Build up of dirt and residue around governor/carburetor. 4. Key Switch not in run position. 5. Electric starter not functioning. 1. Out of fuel. Engine stops.

  • Page 26: Specifications

    Model Number 932040 Description ST5520E Engine - Tecumseh LH195SP Engine Power – hp (kW) at Maximum 5.5 (4.1) Fast Idle Speed-RPM (min Displacement - in. (cc) Electric Start 120V Fuel Tank Capacity - qt. (L) 2.0 (1.96) Snow Clearing Width in.

  • Page 27: Warranty

    1000 hours of use, whichever comes first, if any product is rented or leased. Ariens Company • 655 W. Ryan St, P.O. Box 157 • Brillion, WI 54110-0157• (920) 756-2141 • www.ariens.com Warranties 3-Year Limited Sno-Thro Warranty...
  • Page 28 (12) months after the date of purchase. Ariens may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating Ariens to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective.
  • Page 30 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com...

This manual is also suitable for:

Sno-thro st5520eSno-thro 932041 - st7524e 9Sno-thro st7524eSno-thro st7524Sno-thro st5520Sno-thro st624 ... Show all

Table of Contents