Moving And Transporting The Printer; Moving The Printer - Ricoh Aficio CL7200 Maintenance Manual

Appendix

Moving and Transporting the Printer

• When moving the machine, each person should hold the handle on the
sides, and lift slowly. Lifting carelessly or dropping it may cause injury.
• When moving the printer, remember to unplug the power cord from the wall
outlet to avoid fire or electric shock.
• When pulling out the plug from the socket, grip the plug to avoid damaging
the cord and causing fire or electric shock.
❒ Basic model printer weighs approximately 83.3 kg (183.7 lb.), duplex unit
standard model printer weighs approximately 92.5 kg (203 lb.).
Protect the printer by using the original packaging when transporting.
❒ Be sure to disconnect all cables from the printer before moving it.
❒ This printer is a piece of precision machinery. Take care to avoid damage dur-
ing shipment.

Moving the Printer

• When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged forcefully, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.
Moving the printer in the short distance
A
Be sure to check the following:
• The power is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
B
If you have installed external options, remove them.
C
Be sure to close the bypass tray and front cover.
D
Lift the printer and move it horizontally to the place you want to install it.
159