Detaching And Reattaching The Options; Detaching The Sr960 (2 Tray Finisher) - Ricoh Aficio CL7200 Maintenance Manual

Replacing Consumables and Maintenance Kit

Detaching and Reattaching the Options

This section describes how to detach or reattach optional finishers and how to
open and close the duplex reversal unit. Follow the procedure below when re-
placing various units or removing jammed paper.

Detaching the SR960 (2 Tray Finisher)

There are times when you may need to detach the 2 tray finisher from the printer
to remove misfed paper. This section describes how to detach the 2 tray finisher.
A
Hold the handle at the top of the 2 tray finisher firmly using one hand,
pull the 2 tray finisher straight out, and let go when it stops.
The 2 tray finisher is detached from the printer.
B
Use both hands to push it straight back in, and let go when it clicks into
place.
The 2 tray finisher is reattached to the printer.
❒ Be sure to attach the 2 tray finisher to the printer after closing the duplex
reversal unit. See p.38 "Opening and Closing the Duplex Reversal Unit".
37