Ricoh Aficio CL7200 Maintenance Manual page 105

Troubleshooting
Messages
/ Second messages
Replace Color
PCU soon (A)
Replace Feed
Roller (Type H)
Replace Fusing
Unit (Type C)
Replace Fusing
Unit soon (C)
Replace Transfer
Belt
Replace Waste
Toner (Type E)
Reset Develop.
Unit correctly
XXX/XXX
Reset Duplex
Unit correctly
Reset Finisher
correctly
Description
The time to replace the color
PCU is soon.
It is time to replace the feed roll-
er (Type H).
It is time to replace the fusing
unit.
The time to replace the fusing
unit is soon.
It is time to replace the transfer
belt.
It is time to replace the waste
toner.
The indicated development
unit(s) is/are not set correctly,
or not set.
XXX: Yellow/Magenta/Cy-
an/Black
The duplex paper feed unit is
not set correctly or not set.
The finisher is not set correctly,
or not set.
Solution
Prepare to replace the color PCU
when the message "Replace Color
PCU (Type A)" appears on the dis-
play.
Replace the feed rollers. Depending
on your service contract, contact your
sales or service representative.
See p.68 "Replacing the Paper Feed
Roller"
Replace the fusing unit. Depending on
your service contract, contact your
sales or service representative.
See p.58 "Replacing the Fusing
Prepare to replace the fusing unit
when the message "Replace Fusing
Unit (Type C)" appears on the display.
Replace the transfer belt. Depending
on your service contract, contact your
sales or service representative.
Replace the waste toner bottle. De-
pending on your service contract, con-
tact your sales or service
representative.
See p.65 "Replacing the Waste Toner
Bottle".
Set the indicated development unit(s)
correctly.
See p.52 "Replacing the Development
Unit".
Remove and re-install the duplex pa-
per feed unit. If the error continues,
contact your sales or service repre-
sentative.
See "Attaching Duplex Unit Type
7100", Setup Guide.
Turn the power off, and then on. Re-
move and re-install the finisher cor-
rectly. If the message appears again,
contact your sales or service repre-
sentative.
See p.37 "Detaching and Reattaching
the Options".
Unit".
105