Ricoh Aficio CL7200 Maintenance Manual page 103

Troubleshooting
Messages
/ Second messages
Proxy User Name/
Password error
Proxy setting or
connection error
RC Gate
connection error
Ready
Remove Misfeed
A:Internal Path
/ See Instructions
in Front Cover
Remove Misfeed
B:Fusing Unit
/ See Instructions
in Front Cover
Remove Misfeed
R:Finisher
/ Open
Finisher Cover
Remove Misfeed
Y:Paper Tray
/ See Instructions
in Front Cover
Remove Misfeed
Z1:Duplex Unit
/ See Instructions
in Front Cover
Remove Misfeed
Z2:Dup.Feed Unit
/ Open
Front Cover
Remove Paper
All Output Trays
Remove Paper
Finisher Tray #
Description
Proxy user name and/or pass-
word are incorrect.
Proxy address port number is
invalid. Proxy is not active or
not set.
Cannot communicate with RC
Gate.
The default ready message.
The printer is ready to use.
There is a misfeed in the print-
er.
There is a misfeed in the fusing
unit.
There is a misfeed in the finish-
er.
There is a misfeed in the speci-
fied input tray, or the printer is
not feeding paper.
There is a misfeed in the duplex
unit.
There is a misfeed in the duplex
feed unit.
All output trays are full.
The indicated finisher shift tray
is full.
#: finisher shift tray number
Solution
Change current user and password to
the correct user name and password.
Check the proxy settings.
Check the device or the RC Gate net-
work connection.
No action required.
Remove the misfed paper following
the instructions inside the front cover.
See p.138 "When "Remove Misfeed
A:Internal Path" Appears".
Remove the misfed paper following
the instructions inside the front cover.
See p.139 "When "Remove Misfeed
B:Fusing Unit" Appears".
Open the finisher cover and remove
the misfed paper.
See p.142 "When "Remove Misfeed
R:Finisher" Appears".
Remove the misfed paper following
the instructions inside the front cover.
See p.150 "When "Remove Misfeed
Y:Paper Tray" Appears".
Remove the misfed paper following
the instructions inside the front cover.
See p.151 "When "Remove Misfeed
Z1:Duplex Unit" Appears".
Remove the misfed paper.
See p.153 "When "Remove Misfeed
Z2:Dup.Feed Unit" Appears".
Remove paper from all output trays.
Remove the paper from the indicated
finisher shift tray.
103