Adjusting The Color Tone/Brightness Using Negative Film - Ricoh Aficio 6110 Operating Instructions Manual

Adjusting the Color Tone/Brightness Using Negative Film

When you copy negative film, adjust the color tone (density of yellow, magenta, and cyan) and brightness (quantity of
light) according to the table below. However, even when you use the same type of film, you must use different settings
depending on the way the original picture is taken or developed. If you cannot make copies as you want, perform
adjustment.
You can also use the "Color Balance Adjustment" function of the copier to correct slight color difference.
See page 124.
The following table uses these values to indicate the color tone and brightness levels (the crosshatched values (
are the default settings):
Yellow (Y) Lighter
Magenta (M) Lighter
Cyan (C) Lighter
Density Lighter
Manufacturer
Film type SUPER G ACE *3 SUPER V *4 SUPER G *5
ISO sensitivity 100 400 800
Y 5 5
Color M 5 5
C 5 5
Density *1 6 4
Density *2 5 3
Manufacturer
Film type LV *10
ISO sensitivity 100
Y 3
Color M 6
C 5
Density *1 5
Density *2 4
• Density *1 should be used when film is set in the film holder.
• Density *2 should be used when film is set on the exposure glass (platen glass).
*3, *4, *5, *6: These products are registered trademarks of Fuji Photo Film Co., Ltd.
*7, *8, *9: These products are registered trademarks of Kodak Ltd.
*10, *11: These products are registered trademarks of Konica Corporation.
*12: This product is a registered trademark of Agfa Gevaert AG.
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
FUJI COLOR
100 200
5 4 3
5 5 5
5 3 3
5 6 5
4 5 4
Konica
COLOR JX *11
200 100 200M 400
3 4 5 5
5 7 4 5
4 5 4 3
5 6 5 5
4 5 4 4
Adjusting Color, Density and Focus
Darker
Darker
Darker
Darker
REALA ACE *6 GOLD *7
800 100 200 400
5 4 5 5
6 7 7 6
5 6 6 5
4 5 4 5
3 4 3 4
AGFA
COLOR HDC *12
100 200 400
4 6 8
5 6 5
5 5 2
5 4 5
4 3 4
)
Kodak
ROYAL GOLD *8 GOLD *9
100 400 800
5 5 5
7 5 6
6 5 5
5 5 5
4 4 4
229