Slanted Image-Slanting The Copy Image - Ricoh Aficio 6110 Operating Instructions Manual

Slanted Image—Slanting the Copy Image
This function slants the copy image at a selected angle.
Note
The slant direction is decided as shown in the illustration.
You can select the angle from –45 to +45 .
Depending on the angle, some parts of the image may be lost.
1
Press the [Image Creation] key.
2
Press the [Slanted Image] key.
3
Adjust the angle by pressing the arrow keys.
Note
By pressing the [ ] or [
angle can be adjusted by in steps of 5 .
By pressing the [ ] or [
angle can be adjusted by in steps of 1 .
To cancel the angle, press the [Clear] key.
4
Press the [OK] key.
5
Set your originals, then press the Start key.
] key, the number of the
] key, the number of the
Image Creation
95