Area Image Overlay (Only for Edit Type)
6
Press the [Confirm Selection] key.
7
Mark diagonally opposite corners of destination
area.
8
Press the [Confirm Selection] key.
9
If you want to edit the image, press the [Edit
Overlay Image] key.
Note
If you want to edit the background original, press the
[Edit Background] key. For details,
If you want to change the job settings, press the [Ba-
sic Settings] key. For details,
0
If you want to adjust the color/image adjustment,
press the [Color/Image] key.
!
Make any adjustments you require.
Note
Image Density,
see page 39.
Color Mode,
see page 40.
Original Type,
see page 44.
Image Adjustment,
see page 132.
Color Adjustment,
see page 131.
Color Balance Adjustment,
@
Press the [OK] key.
#
If you want to adjust the color creation, press
the [Color Creation] key.
$
Make any adjustments you require.
Note
Color Conversion,
see page 85.
Color Erase,
see page 87.
Color Background,
see page 88.
Press the [OK] key.
Press the Start key.
118
see page 121.
see page 122.
see page 124.