Selecting Modes For Outside Designated Areas; Area Shapes - Ricoh Aficio 6110 Operating Instructions Manual

Selecting Modes for Outside Designated Areas

Reference
The available modes for area editing depend on the area shape.
For functions that cannot be used together in area editing,
More than one mode can be set, however, there are some limitations,
The modes that can be set for outside areas as follows:
Color/Image Adjustment: Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment, Color
Color Creation:
Image Creation:
Note
Color/Image Adjustment's default setting:
Copy Image Density Adjustment - Manual Image Density
Color Mode - Black
The Original Image Type - Photo/Text
You can change the default settings.
The way to set modes is basically the same as for the entire image. For details, refer to each page.
To fill an area with a selected color, select the Paint.
Image Density See page 39.
Original Type See page 44.
Color Adjustment See page 131.
Color Conversion See page 85.
Color Background See page 88.
Type Mask See page 89.
Outline Image See page 91.

Area Shapes

Basic modes
1
Designate the areas you wish to modify.
Note
For designating areas,
2
Press the [Area Edit] key.
3
Press the [Color/Image], [Color Creation] or
[Image Creation] key.
156
Selecting Modes for Outside Designated Areas
Balance Adjustment
Color Conversion, Color Erase, Color Background, Paint, Type Mask
Outline Image, Shadow Image, Positive/Negative
See page 187.
see page 145.
See page 164.
see page 164.
see page 164.
Positive/Negative
Color Mode See page 40.
Image Adjustment
Color Balance Adjustment
Color Erase
Shadow Image
Save Area See page 154.
See page 101.
See page 132.
See page 124.
See page 87.
See page 92.